The E-10A comes with an infinite control switch, safety pilot light, and pyrometer (temperature sensor). The pyrometer simplifies kiln operation. It shows you what is happening inside the kiln and helps you to become comfortable with firing. By watching the pyrometer and adjusting the switch, you can even hold (soak) the temperature.
The switch, pilot light, and pyrometer are mounted in the kiln base (instead of a side switch box) to save table space. The front control panel is tilted for easy operation.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.
Max. Temperature
2000F
Amps
15
Phase
1
Watts
1800
Nema
5-15P
Breaker Size
20
Circuit Wire Size
12 gauge
TUV tested to CSA and UL Standard 499
Y
CE
N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type
INFINITE SWITCH OR Sentry Digital 3-key Glass Control
Voltage
120
Hertz
60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
Kiln Type
Front Loading Square
Sides
4
Understanding Chamber Measurements
Chamber Volume
0.39 CU.FT.
Chamber Width
8.50 IN
Chamber Depth
9.00 IN
Chamber Height
8.75 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
14.00W x 18.00D x 20.50H
Ship Size
21.00W x 28.00D x 24.00H
Ship Weight
71.00 Lbs.
Ship Method & Notations
This Kiln Ships Via UPS
