Paragon SC-2 Digital Kiln
PMC, Silver Clay, Glass Jewelry, Low Fire Ceramics paragon kiln, small kiln, 120 volt kiln, sc 2,sc2 kiln,paragon sc kiln glass kiln,artisan,glass bead,potters kiln

ax Temp F 2000º Cone 03 Inside Width 8" Inside Depth 5 3/4" Internal Height 7 3/4" Cubic Ft .19 Voltage 120 Amperes 12 Watts 1440 NEMA 5-15R Shipping Weight 36 lbs

The digital SC-2 kiln fires silver clay, decals, china paint, enameling, and glass in minutes up to 2000°F. The SC is popular with seminar teachers because it fires fast, plugs into a standard 120 volt household outlet, ships by UPS.  You can program up to 8 segments in Ramp-Hold mode to customize a firing to your exact needs. Fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of clay silver to its recommended time. Sentry Xpress 3 Key Controller Digital .

The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold. Click to watch  Ramp-Hold Demonstration

The high-tech ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even at extended hold times.

1/4" thick ceramic fiber shelf FREE

Options-

1. Bead Door - The 6 1/2” wide bead door includes a brushed stainless steel mandrel holder. (SC-3 Bead Door)
2. Window-The 1” x 3” window is beveled for a wide view of the kiln interior.(Note: always wear firing safety glasses when viewing the kiln interior.) The glass view port is guaranteed up to 1700°F. (SC-3View)
3. Bead Door and Window Together (SC-3 BD & View)
4. Kilns includes 1/4" thick ceramic fiber shelf - The soft ceramic fiber shelf is used to support silver clay pieces. The shelf is not suitable for firing glass or ceramics . Nor should it be coated with glass separator. To fire ceramics or glass, please order the hard ceramic shelf.
5. Fiber Shelf Recommended for PMC & Silver Clay 
6. Ceramic Fire Clay Shelf Recommended for Ceramic &  Glass
   
7. SC Shelf Kit - 1- 7" x 7" ceramic sheld and - 1" wide x 1" tall posts.

 The SC Kiln can be shipped UPS!
**Shipping of Kiln ONLY within Continental US ONLY. 

Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns

• Design programs with up to 8 segments (steps) in Ramp-Hold mode.
• Fire to a single temperature at a single speed in the simplified Single Speed mode.
• Ramp-Hold mode can store 4 programs.
• Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
• Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
• Add Hold Time during firing without having to stop the kiln to reprogram.
• Control both heating and cooling in Ramp-Hold.
• Program Review lets you check the program you are about to fire.
• Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
• Temperature display throughout firing and cooling in your choice of °F or °C
• Thermocouple Offset adjusts the thermocouple readout.
• Set the Delay to turn on the kiln later to suit your schedule.
• Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
• 12 Month Warranty
• LED Lights show whether you are in program, review, or firing mode.
• Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.