|
Paragon Xpress-E-10
The smallest size E-series, the digital Xpress-E-10 fires to 2250°F- ideal for enameling, ceramics, china painting, glass art and jewelry.
Features a Digital - Sentry Xpress 3 Key Controller Digital
 |
Digital Controller fires in either Ramp-Hold or Cone-Fire. Control both heating and cooling with simple 3-key operation.
WATCH DIGITAL CONTROL DEMO
Ramp-Hold Demonstration |
The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller. Because this model no longer has the side-mounted switch box, it saves tabletop space.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Segment and 8-segment Ramp-Hold.
| Model |
E-10A |
| Max Temp F |
2250ºF |
| Chamber Width |
8.5" |
| Chamber Depth |
9.0" |
| Chamber Height |
8.75" |
| Cubic Feet |
0.39 cu ft |
| Outside Width |
14" |
| Outside Depth |
18" |
| Height |
20.5" |
| Phase |
1 |
| Voltage |
120 |
| Amperes |
14 |
| Watts |
1680 |
| Shipping Weight |
90 lbs |
|
Design programs with up to 8 segments (steps) in Ramp-Hold mode.
Fire to a single temperature at a single speed in the simplified Single Segment mode.
Ramp-Hold mode can store 4 programs.
Skip Segment feature in Ramp-Hold mode
Temperature hold
The Sentry Xpress can control both heating and cooling.
Program Review lets you check that the program you are about to fire is correct.
Temperature Display throughout firing and cooling in your choice of °F or °C
Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
12 Month Warranty
LED Lights show whether you are in program, review, or firing mode.
|
The heating element, exposed in dropped, recessed insulating firebrick grooves, is easy to replace. It needs no element pins. Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.
|