Sentry 2.0 digital controller includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10 (2350°F). You can also fire several shelves of smaller glass pieces using the pottery mode
You can program the Sentry 2.0 controller demo as if you had a real controller in front of you. Enter programs and master the controller from your computer before you buy a kiln. Or come here to practice on the controller before you fire your Paragon kiln.
This is an interactive video, make sure your browser supports flash.: Start
Max. Temperature
2350F
Amps
48
Phase
1
Watts
11520
Nema
6-50P
Breaker Size
60
Circuit Wire Size
6 gauge
TUV tested to CSA and UL Standard 499
Y
CE
N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type
Sentry Digital 12-key Ceramics
Voltage
240
Hertz
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
Kiln Type
Top Loading Round
Sides
12
Understanding Chamber Measurements
Chamber Volume
8.11 CU.FT.
Chamber Width
28.00 IN
Chamber Depth
22.25 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
36.30W x 49.80D x 40.00H In
Ship Size
47.00W x 42.00D x 41.00H In
Ship Weight
397.00 Lbs.
Ship Method & Notations
This Kiln Ships Via Truck
(Not Installed) The patented Orton Vent Master not only vents fumes but also improves firing results. It pulls fresh oxygen into the kiln for brighter colors, especially notice
