Anneal large glass figurines in the digital F-120 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller punty rod door. This allows the glass to anneal safely.
You can make figurines up to 5” tall in the F-120. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
High Resolution: Click the [>] to Play, [||] to Stop
Max. Temperature
1700F 926C
Amps
14
Phase
1
Watts
1680
Nema
5-15P
Breaker Size
20
Circuit Wire Size
12 gauge
TUV tested to CSA and UL Standard 499
Y
CE
N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type
Sentry Digital 3-key Glass Control
Voltage
120
Hertz
60
Kiln Type
Front Loading Square
Sides
4
Understanding Chamber Measurements
Chamber Volume
0.48 CU.FT.
Chamber Width
10.75 IN
Chamber Depth
11.00 IN
Chamber Height
7.00 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
20.50W x 23.00D x 20.00H In
Ship Size
28.50W x 28.50D x 27.00H In
Ship Weight
125.00 Lbs.
Ship Method & Notations
This Kiln Ships Via Truck
