Anneal large glass figurines in the digital F-240 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller punty rod door. This allows the glass to anneal safely.
You can make figurines up to 11” tall in the F-240. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.
The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
High Resolution: Click the [>] to Play, [||] to Stop
Max. Temperature
1700F 926C
Amps
20
Phase
1
Watts
4800
Nema
6-20P
Breaker Size
Circuit Wire Size
12 gauge
TUV tested to CSA and UL Standard 499
Y
CE
N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type
Sentry Digital 3-key Glass Control
Voltage
240
Hertz
60
Kiln Type
Front Loading Square
Sides
4
Understanding Chamber Measurements
Chamber Volume
2.40 CU.FT.
Chamber Width
18.00 IN
Chamber Depth
Chamber Height
13.00 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
29.00W x 32.00D x 28.50H In
Ship Size
36.00W x 37.50D x 36.50H In
Ship Weight
288.00 Lbs.
Ship Method & Notations
This Kiln Ships Via Truck
