m
School PO'S Welcome




Item(s): 0
$0.00
  View Cart

Search for an Item:
Search:

Home
Kilns
   120V KILNS
   SMALL
   MEDIUM
   LARGE
   CRESS KILNS
   EVENHEAT KILNS
   OLYMPIC KILNS
   PARAGON KILNS
   GLASS KILNS
   JEWELRY KILN
   GAS & RAKU KILN
   KNIFE/HEAT TREATING KILNS
   MEDALLION KILNS
   FREEDOM KILNS
   MULTI-USE KILNS
   Kiln Accessories
Pottery Wheels
Studio Equipment
Pottery & Kiln Tools
Clay
Gift Certificates
Financing
School Information
Customer Service
*Shipping Information
Contact Us
My Account
Paragon HT-10D Industrial

Item: Paragon HT-10D Industrial
Retail Price: $1505.00
Price: $1262.00
Instant Rebate:
Knife Makers Kit:
Gas Inlet Flow Meter:
TF62 Data Port:
Shipping Options:
Qty:
 
This kiln requires freight shipping.  Freight included to commercial location ony.   
BEFORE PLACING YOUR ORDER- This kiln ships via freight carrier 
CLICK HERE for freight delivery information!

Machine shops save time with a furnace at their disposal in their own shop. You will no longer send a die out for heat treating, wait for its return and then send it out again for additional heat treating.

Solid construction

The door swings open with one-handed operation. The PMT-10 furnace is insulated with refractory firebrick. The elements are mounted in dropped, recessed grooves machined into the firebrick. Paragon invented this type of groove in 1952. This groove protects the element for long life and low maintenance. Elements are simple to replace because they are exposed rather than embedded. You can thread new elements into place following clear instructions in the manual.

The firing chamber is protected by a steel case painted in high temperature blue. A built-in stand lifts the firing chamber safely off your worktable, so no extra stand is needed. The door is mounted with a heavy-duty hinge for smooth opening. A micro-switch shuts off the power to the elements when the door is opened. We use high temperature wire in the switch box for long life. A heat shield, mounted between the switch box and furnace, helps keep the switch box components cool even during extended operation. To further dissipate heat, the switch box is extra large and generously louvered. Each furnace comes with a cord and plug for immediate installation and a one year warranty.

Complete instructions

Your furnace includes a wiring diagram, programming instructions, and heat treating manual. The manual gives you basic heat treating instructions for D2, 440C, ATS 34 and 154 CM. The manual is written in plain English for the beginner.

Optional Gas Injection Flow Meter

During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. An easier way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed.

The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.

Max. Temperature

2000F
1093C

Amps

14

Phase

1

Watts

1692

Nema

5-15P

Breaker Size

20

Circuit Wire Size

14 gauge

TUV tested to CSA and UL Standard 499

N

CE

N

IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
 

Control Type

Sentry Digital 12-key Non-Ceramic

Voltage

120

Hertz

60

 

Kiln Type

Front Loading Square

Sides

4

Understanding Chamber Measurements

Chamber Volume

0.39 CU.FT.

Chamber Width

8.50 IN

Chamber Depth

9.00 IN

Chamber Height

8.75 IN

The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

14.00W x 18.00D x 20.50H In

Ship Size

21.00W x 28.00D x 24.00H In

Ship Weight

71.00 Lbs.

Ship Method & Notations

This Kiln Ships Via Truck

 
Sentry 12-Key 2.0 
  • Temperature Display throughout firing and cooling in your choice of °F or °C 
  • Stop/Back Key goes back one step with each key press during programming. Use this feature to correct programming errors
  • Add Time Key adds five minutes to a temperature hold with each key press during firing. Helpful for glass with holds. 
  • Program Review lets you check that the program you are about to fire is correct. 
  • Audible Temperature Alarm to remind yourself to close a vented lid or to check the kiln near firing completion.
  • 30 Month Warranty
  • Thermocouple Selection The Sentry 2.0 can operate types K, S or R thermocouples. 
  • Error Messages report mechanical problems such as a disconnected thermocouple, bad voltage, temperature deviation. 
  • 14 Segment Display is easier to read than the previous 7 segment. 
  • Program Safety Lock for the program in active memory. Gives you peace of mind. 
  • Delay Fire Set the time that the firing is to start. The kiln will turn on at that time. 
  • LED Lights show when the relays are powered. 
  • Quick Release Molex Connectors permit fast removal of the controller. Replacing the Sentry 2.0 or Sentry Xpress takes only minutes. 
OPTIONS

Optional Knife Making Kit Contains 1 pair hot gloves, 1 heat treating fork, 4 knife holders, and 8 firebrick supports.

Optional 1/4" GAS INLET AND FLOW METER (MANUAL) During heat treating, scale forms on the surface of the steel. One way to eliminate most scaling is to wrap the steel in stainless steel foil. An easier way is to install the gas injection flow meter on your furnace. It is available as either an add-on kit, or you can order the furnace with the meter installed. The meter regulates the flow of an inert gas, such as argon, inside the furnace. The gas displaces the oxygen to prevent most scaling.

Optional TF62 Data Port The RS232 is a computer port mounted to the kiln. You can monitor the kiln from a computer and store a record of each firing on your hard drive. Print graphs of firings.

HT 10D, 10d, ,Paragon knife kiln, knife kiln, paragon heat treating kiln, heat treating kiln, heat treat metal
Sitemap | Copyright © 1999, 2010, 2011-2015 MudInMind.com. All Rights Reserved.
ClientReady.com Ecommerce Websites