|
The PARAGON Iguana has power to spare. This results in long element life, because the elements do not struggle to reach high temperatures. 10,800 watts heat the 18" wide, 18" deep, 22" high interior (4.2 cu ft) to a full cone 10 .
Easy Installation The 240 volt Iguana plugs into a standard NEMA 6-50R outlet, so you can fire it on the outlet most studio kilns already use. This kiln requires a 60 AMP breaker.
Easy to Load The Iguana is easy on the back muscles. With the optional 22" stand, the interior floor height is a comfortable 34".
Dropped, recessed grooves seat industrial-gauge elements. The elements are easy to replace, because you can comfortably reach into the kiln.
Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open wide on a heavy steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat.
The Sentry 2.0 digital controller  is manufactured by Orton Ceramic Foundation. It is unsurpassed in reliability for a controller in its price range. It includes a programmed cool-down, Cone-Fire and Ramp-Hold modes, and is capable of accepting types K, R, or S thermocouples. A type-K thermocouple with an Inconel sheath comes standard.
For your peace of mind, the Iguana includes a switch that shuts off power to the controller when not in use.
- Heavy-gauge steel completely covers the bottom under the firebricks
- Saves electricity with 3” firebricks
- Cone 10, 2,350°F
- Type-K thermocouple with ¼” sheath, or optional type-S
- Sentry 2.0 controller with programmed cool-down
- Two tapered peepholes in side
- Available in 200, 208, 220, 240, 480 volts, 1 & 3 phase
- Proportional power elements for more even heating
- Air gap between the switch box and kiln; electrical components stay cool and last longer
- Built-in fuse protects the controller
- Four hand-lifts
|
Max. Temperature
|
2350F
1287C
|
|
Amps
|
45
|
|
Phase
|
1
|
|
Watts
|
10800
|
|
Nema
|
6-50P
|
|
Breaker Size
|
50
|
|
Circuit Wire Size
|
6 gauge
|
|
UL
|
N
|
|
CE
|
N
|
|
Control Type
|
Sentry Digital 12-key Ceramics
|
|
Voltage
|
240
|
|
Hertz
|
60
|
|
|
Sides
|
4
|
|
Chamber Volume
|
4.20 CU.FT.
118.93 litres
|
|
Chamber Width
|
18.00
458 mm
|
|
Chamber Depth
|
18.00
458 mm
|
|
Chamber Height
|
22.50
572 mm
|
|
Outer Size
|
36.00W x 31.30D x 60.00H Inches
|
|
Ship Size
|
42.00W x 34.00D x 68.00H Inches
|
|
Ship Weight
|
483.00 Lbs.
219.09 Kg.
|
|
Ship Method
|
This Kiln Ships Via Truck
|
|
|
