Select between glass and pottery with the flip of a switch. With the switch in glass mode, heat comes from the top elements and the middle sidewall element. With the switch in pottery mode, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.
The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently, evenly radiating heat onto the glass.
The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.
Max. Temperature
2350F
Amps
20
Phase
1
Watts
4800
Nema
6-20P
Breaker Size
Circuit Wire Size
12 gauge
TUV tested to CSA and UL Standard 499
Y
CE
N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type
Sentry Digital 12-key Ceramics
Voltage
240
Hertz
60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
Kiln Type
Top Loading Round
Sides
8
Understanding Chamber Measurements
Chamber Volume
1.75 CU.FT.
Chamber Width
16.50 IN
Chamber Depth
13.25 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
25.50W x 32.50D x 29.00H
Ship Size
36.00W x 36.00D x 27.00H
Ship Weight
171.00 Lbs.
Ship Method & Notations
This Kiln Ships Via Truck
(Installed after the kiln is set up) The patented Orton Vent Master not only vents fumes but also improves firing results. It pulls fresh oxygen into the kiln for brighter colors, especially notice
