Select between pottery and glass with the flip of a switch. With the switch in the pottery position, heat comes from only the sidewall elements. With the switch in the glass position, heat comes from the top element and the middle sidewall element.
Sentry 2.0 digital controller includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10 (2350°F). You can also fire several shelves of smaller glass pieces using the pottery mode.
The element in the lid/roof are mounted in a firebrick ball groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.
Circuit Wire Size
Sentry Digital 12-key Ceramics
40.50W x 32.00D x 29.50H Inches
1029W x 813D x 750H mm
46.50W x 36.00D x 36.50H Inches
1182W x 915D x 928H mm
This Kiln Ships Via Truck
(Installed after the kiln is set up) The patented Orton Vent Master not only vents fumes but also improves firing results.
It pulls fresh oxygen into the kiln for brighter colors, especially notice