The smallest size E-series, E-14 fires to 2000°F- ideal for enameling, ceramics, china painting, glass art and jewelry. AVAILABLE IN HOT PINK, PURPLE, BLACK & TURQUOISE
The digital Sentry Xpress controller includes temperature hold, making this kiln suitable for silver clay. The 3-key digital controller is in the base. The front control panel is tilted for easy operation of the digital controller.
The E-14 Xpress kiln fires rapidly to 2000F. Create breathtaking jewelry or small keepsakes using almost any medium you can imagine: silver clay, enameling, china painting, glass, lost wax casting, ceramics, stoneware, and porcelain.
Max. Temperature
2000F
Amps
13
Phase
1
Watts
3120
Nema
6-20P
Breaker Size
20
Circuit Wire Size
12 gauge
TUV tested to CSA and UL Standard 499
Y
CE
N
IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.
Control Type
Sentry Digital 3-key Glass Control
Voltage
240
Hertz
60
Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.
The pricing and electrical specifications for the above products reflect their design for use in the United States.
Kiln Type
Front Loading Square
Sides
4
Understanding Chamber Measurements
Chamber Volume
0.89 CU.FT.
Chamber Width
13.00 IN
Chamber Depth
13.50 IN
Chamber Height
8.75 IN
The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom
Outer Size
18.25W x 22.50D x 20.50H
Ship Size
32.00W x 24.00D x 26.50H
Ship Weight
131.00 Lbs.
Ship Method & Notations
This Kiln Ships Via Truck
A 1/2” hole is stamped into the steel door case and includes a brushed stainless steel cover. We have left the firebrick behind the hole undrilled so that you can drill it to the exact size that you need for a peephole, vent hole, or extra pyrometer hole. (Most people do not need the hole and leave the firebrick undrilled.) The Xpress-E-14A heating elements, exposed in dropped, recessed insulating firebrick grooves, are easy to replace. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the elements back on during cooling. (Extra heat is necessary for annealing large pieces, however.) Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation. Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.
The Xpress-E-14A heating elements, exposed in dropped, recessed insulating firebrick grooves, are easy to replace. The 2 1/2” thick firebricks store plenty of heat for slow cooling through the glass annealing range. For small glass pieces such as jewelry, you can anneal without having to turn the elements back on during cooling. (Extra heat is necessary for annealing large pieces, however.)
Unlatch and open the door with one hand. No extra stand is needed; the built-in base stays cool during operation.
Paragon kilns are built to be dependable. They are loaded with attention to details, such as the costly nickel-plated copper wire with high temperature glass-braided insulation. Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns.
